!!! Required to read! ACTIVATION PROCEDURE ADJUSTMENT PROGRAM PX-045A, PX-405A, PX-435A:
After paying for the program and downloading it, copy the archive with the program to the computer where the program will work.
Be sure to extract the program from the archive, using the archiver program, for example, Winrar. Run the Adjprog.exe program with a double click. You will see a window with ID number, copy this number and send it to our email email@example.com with the subject "I bought from you the program Adjustment program PX-045A, PX-405A, PX-435A"
We will send you the Serial Number, which you insert into the already launched program, in the "Serial Number" field and click Registration. Serial number save in a safe place, in case you need to re-activate.
Please note, we do not send the serial number instantly, tk. This procedure is carried out in manual mode, often it takes from 5 to 30 minutes, from 23 to 9 according to MSCs do not ship.
Further with the program work in a usual mode as it is described for example here: http://printblog.ru/remont-printerov/remont-prniterov-i-mfu-epson/sbros-pampersa-epson-l132-l222-l312-l362-
Attention! Adjustment program PX-045A, PX-405A, PX-435A
Adjustment program The PX-045A, PX-405A, PX-435A is a utility program for the specified printer model, the program allows you to reset the diaper (scanner, absorber), prescribe the print head ID and other functions.
Features of the program:
Interface Language English
The program resets the Main pad counter counter for the following printer models:
1) Epson PX-045A
2) Epson PX-405A
3) Epson PX-435A
The program will only work on one computer under which you will receive an activation key.
Windows can reinstall and reactivate the program with the received activation key.
The configuration of the computer can not be changed, if you change the hard drive or the processor of the computer, the program will no longer be activated and you will have to re-purchase the activation key.
The program does not work on Mac OS
Some anti-viruses can swear on the program, so while working with the program, you should disable them or add the program to the exceptions.